First, I started off with some virgin soft type copper tubing. 50ft, 1/2" OD. I bent it up into shape.
Add some 1/2" silicone tubing and here's the unit in action
A video of the whirlpool action
Saturday, March 23, 2013
Whirlpool Immersion Chiller
Just a pictorial of my latest brewery addition, a Jamil Zainasheff inspired whirlpool immersion chiller.
First, I started off with some virgin soft type copper tubing. 50ft, 1/2" OD. I bent it up into shape.
Bottom bends are the most difficult
Test fitted to the new 50L Keggle
Next, I soldered some 1/2 ID copper pipe with a couple of 90 elbows and a 3/8" reducer to improve flow. Note, in this picture I am using the pump and whirlpool attachment to rack from my boil kettle to carboy.
Add some 1/2" silicone tubing and here's the unit in action
The pump setup. This is a Great Brew Eh pump.
A video of the whirlpool action
First, I started off with some virgin soft type copper tubing. 50ft, 1/2" OD. I bent it up into shape.
Add some 1/2" silicone tubing and here's the unit in action
A video of the whirlpool action
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment